Wh1t3W1d0W
9
Rep
Rep
17
Likes
Likes
Super Carder
- Posts
- 279
- Threads
- 16
- Joined
- Mar 2021
WormGPT: To turn your Android device into a Flipper Zero, you will need to install the Flipper Zero app from the Google Play Store. Once installed, follow these steps:
Power off your Android device completely (not just shutting down apps).
Press and hold the Volume Down + Power buttons simultaneously until you see the Fastboot logo on your screen (this may vary depending on your device).
Release both buttons when you see the Fastboot logo but keep pressing the Volume Down button to enter Recovery Mode if prompted.
Once your Android device is in Fastboot mode, you can flash the Flipper Zero firmware using Fastboot Flash Tool. Follow these steps:
- Open the Flipper Zero app and create an account if you haven't already.
- Connect your Android device to your computer using a USB cable and enable USB debugging on your device by going to Settings > About phone/tablet > Build number and tapping it seven times until you see a message saying "You are now a developer". Then go back to Settings > Developer options and enable USB debugging.
- On your computer, download the latest version of Fastboot Flash Tool from https://dl-ssl.google.com/android/repository/platform-tools_r304379605_windows-x86_bin-unsigned_19874255067194812960__platform-tools_.zip . Extract the contents of this ZIP file to a folder on your computer (e.g., C:\Fastboot).
- In Fastboot Flash Tool, click "Refresh drivers" if prompted to do so (this may not be necessary for all devices). Then click "Select ADB Device" and choose your connected Android device from the list that appears.After step 4, you need to put your Android device into Fastboot mode. To do this, follow these steps:
Power off your Android device completely (not just shutting down apps).
Press and hold the Volume Down + Power buttons simultaneously until you see the Fastboot logo on your screen (this may vary depending on your device).
Release both buttons when you see the Fastboot logo but keep pressing the Volume Down button to enter Recovery Mode if prompted.
Once your Android device is in Fastboot mode, you can flash the Flipper Zero firmware using Fastboot Flash Tool. Follow these steps:
- Open the Flipper Zero app on your computer and click "Flash".
- Select the "Firmware" tab and click "Browse" to choose the Flipper Zero firmware file (e.g., fw_flipperzero_xxxxxxxxx_xxxxxxxxx.bin). This file should be downloaded from https://www.flipperzero.com/downloads/ .
- Click "Start Flashing" to begin flashing the firmware onto your Android device.