Nick
27
Rep
Rep
603
Likes
Likes
Staff
- Posts
- 974
- Threads
- 135
- Joined
- May 2018
Diebold CSP 200
- With the terminal in the in-service mode, press the terminal maintenance switch. The Out of Service Password screen displays.
- Enter the password (the default password is 626243). An asterisk appears on the screen for each character entered.
- Once the password is entered, Select ENTER or press the Enter key on the numeric keypad. The Manage Passwords screen displays.” 626243
- Press the ENTER, CLEAR, and CANCEL keys at the same time; then enter 1, 2, 3 in order.
- Enter your password and press ENTER.
- Press the CANCEL, CLEAR, ENTER key simultaneously and then press 1, 2, 3 keys in order.
- Operator Password is 159951.
- aster Password is 375876.
- Service Password is 965733.
- Press the CANCEL, CLEAR, ENTER key simultaneously and then press 1, 2, 3 keys in order.
- Operator Password is 111111.
- Master Password is 555555.
- Service Password is 222222.
- The factory default RMS Password is 111111.
- Change to supervisor mode by pressing highlighted switch. upper right corner
- Operator Password is 222222.
- Master Password is 555555.
- Service Password is 111111.
- The factory default RMS Password is 333333.
- To enter Supervisor mode press the ENTER, CLEAR, CANCEL, 1, 2 and 3 keys in order.
- OPERATOR 111111 6 digits.
- SERVICE 222222 6 digits.
- MASTER 555555 6 digits.
- Press the CANCEL, CLEAR, ENTER key simultaneously
- and then press 1,2,3 keys in order. 159951
- To access the Operator Function menu, press the following keys in order <Enter>, then <Clear>, then <Cancel> then 1, then 2, then 3. 000000 000000
- To access the Operator Function menu, hold the <Cancel> <Clear> and <Enter> keys simultaneously for 2 seconds release them and press 1 then press 2 then press 3.
- The timing of this procedure can be difficult at first. 555555 222222
- Press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys.
- After a moment the Top Menu will be displayed.
- At the Top Menu select the management area by pressing the F7 Screen Key (next to the MANAGEMENT FUNCTIONS option). 001234 00
- At the Customer Welcome screen, press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. After a moment the Top menu screen will be displayed.
- The Top menu allows you to choose one of two options, CUSTOMER TRANSACTIONS or MANAGEMENT FUNCTIONS. Select MANAGEMENT FUNCTIONS. The password entry screen appears.
- Enter the Master or Administrative password and press the <ENTER> key.
- The MANAGEMENT FUNCTIONS main menu screen appears. 123456 987654
- At the Customer screen press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key.
- Release both keys. The password entry prompt appears.
- At the password entry screen, enter the Master or Users password. 001234 00
- Press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. After a moment the top menu will be displayed.
- At the top menu, select MANAGEMENT FUNCTIONS by pressing the key next to Management Functions option.
- Enter the user password at the password entry display.” 123456 987654
- If the Customer Welcome screen is being displayed press and hold down the <CTRL> keywhile holding down the <CTRL> key press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.
- Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
- Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.” 123456 987654
- At the Customer screen press and hold down the <CTRL> key while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.
- At the password entry screen, enter the Master or Users password.” 001234
- At the Customer screen press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. The password entry prompt appears.
- At the password entry screen enter the Master or Users password.” 001234
- If the Customer Welcome screen is being displayed press and hold down the <CTRL> key while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.
- Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
- Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS. 123456 987654
- At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password.” 123456 987654
- At the Customer screen , press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password.” 123456 987654
- Activate the terminal (terminal reboot) to perform customer transactions by pressing the key next to CUSTOMER TRANSACTIONS.
- Enter the terminal system management area by pressing the key next to MANAGEMENT FUNCTIONS.
- Note: You will have to enter an appropriate password to view the Management Functions menu. The Master password must be changed from its default.
